If your home battery is not charging, not discharging or appears to be ignoring its schedule, the symptom alone does not prove that the battery has failed. The same visible behaviour can result from operating settings, state of charge, household demand, available solar generation, metering or communication information, or an equipment fault.
The useful first step is therefore not to reset equipment or change electrical settings. Check what the approved user interface currently shows, compare it with what you expected to happen, record the evidence and decide who is best placed to investigate next.
In short
Record what the battery is showing before changing anything. Check visible state of charge, operating mode, schedule or reserve settings, solar generation, household demand, grid flow, connectivity and any warning message. If the evidence still does not explain the behaviour, pass it to the manufacturer, installer or other appropriate support owner rather than attempting generic reset, wiring or breaker procedures.
First: does this behaviour actually prove the battery has failed?
No. A home battery can appear inactive for more than one reason, so the observation and the diagnosis should be kept separate. A useful troubleshooting record starts with what you can actually see: the battery's state of charge, current power-flow information, operating mode, schedule, warnings and the time at which the behaviour occurred.
Not charging, not discharging and “doing nothing” are different symptoms
A battery that is not charging when solar generation is available is a different observation from a charged battery that is not discharging while the home imports from the grid. A missed overnight schedule is different again. Record the specific symptom instead of describing the whole system simply as “not working”.
That distinction gives support or your installer a much clearer starting point and reduces the risk of treating one possible explanation as if it were already proven.
An app status is not the same thing as physical battery operation
If an app reports that the system is offline, the status is useful evidence, but it does not by itself prove either that the physical battery has stopped operating or that the battery is continuing normally. A communication or monitoring problem can exist on its own, but an offline indication can also coincide with a wider system problem.
Check whether the data timestamp is current and record what the approved interface shows. For a wider explanation of control and connectivity questions, see our guide to home battery apps and smart control.
If your home battery is not charging
Start with the conditions visible to you rather than a list of possible failed components. Note the current state of charge and whether the system shows available solar generation, household demand, grid import or export and an active charging schedule.
Then check the operating mode shown in the approved interface, any user-visible reserve or charge limit, the current date and time, data freshness and any warning or error text. If you expected grid charging during a particular tariff window, record that window as well.
These observations help establish what the system was being asked to do and what information it was working with. They do not establish the root cause. For example, an apparently available solar surplus does not by itself prove that the battery should have been charging at that moment.
If your home battery is not discharging
Use the same evidence-first approach. Record the battery state of charge, any reserve shown to you, the current operating mode, the active schedule, household load and the grid-flow information shown in the system.
A battery that appears charged while the property imports electricity from the grid is worth investigating, but that observation does not identify the cause. A reserve, schedule, mode, measurement issue or other system condition may need to be checked before anyone can reach a diagnosis.
Capture the relevant screen with a timestamp if possible. A short sequence of screenshots showing the battery state, household load and grid flow can be more useful than changing settings and then trying to reconstruct what happened afterwards.
Check mode, reserve and schedule before assuming a fault
Operating mode tells the system how it should use available energy. A schedule can define when charging or discharging is intended to occur, while a reserve or state-of-charge limit may retain energy instead of making all stored energy available for normal discharge.
For troubleshooting, your task is to read those values, compare them with what you expected and record the difference. Do not enter installer or service settings or force a different mode simply as an experiment.
If the issue is specifically about using a cheap-rate charging period rather than a possible fault, our guide to overnight battery charging covers that decision separately.
Could the meter or app be giving you the wrong picture?
Battery control can depend on measurements of household consumption, import, export and solar generation. If one of those displayed values looks implausible, treat that as evidence to record rather than proof that a CT, meter or other component is installed incorrectly.
For example, do not conclude from an unexpected import/export display that “the CT is backwards”. Record the reading, the direction of the apparent flow, the time and what the home was doing, then ask the appropriate installer or support team to verify the measurement configuration.
Your electricity supplier's smart meter and the metering used by a battery-control system are also not automatically the same thing. Our guide to home battery metering and CT setup explains the distinction in more detail.
What you can safely check yourself
Keep homeowner troubleshooting non-invasive. The aim is to collect a reliable snapshot of the system without opening equipment, changing fixed wiring or experimenting with electrical protection devices.
Safe triage checklist
Observation does not automatically mean adjustment. A value being visible in an app is not, by itself, an instruction to change it.
When to stop troubleshooting
A battery that is simply behaving differently from its schedule is not the same situation as a battery showing physical safety warning signs. Stop normal troubleshooting if the issue moves beyond settings, monitoring or ordinary operating behaviour.
Stop and use the appropriate safety route
Do not open the battery, alter fixed wiring, move CT clamps, enter installer or service settings, or use a generic breaker, isolator or reset sequence from another product.
Generic lithium-ion fire guidance identifies warning signs including visible swelling or leakage, unusual smells or sounds, or smoke. Those signs are reasons to stop ordinary troubleshooting and follow the exact manufacturer and emergency guidance for the equipment involved. Do not touch the equipment to investigate a suspected safety problem.
If you see smoke or flames, treat it as a fire emergency. Scottish Fire and Rescue Service advises getting out, staying out and calling 999 rather than trying to extinguish a lithium-ion battery fire yourself.
PAS 63100:2024 is a fire-safety specification for battery energy storage systems installed in dwellings, aimed primarily at competent designers and installers, manufacturers and certification bodies. It should not be treated as a homeowner repair manual. It is a standard rather than part of government regulation, as confirmed by the UK Government's written answer to Parliament.
What information to collect before contacting support
A useful support request should make it possible to identify the system and reconstruct the event without first asking you for basic information. Prepare the evidence before contacting the responsible support owner.
Evidence pack
- System identity: battery make and model, configuration and serial number if available.
- What happened: a specific description such as “did not charge during the scheduled period” rather than only “not working”.
- When it happened: date, time and whether the behaviour is continuous or intermittent.
- Visible status: state of charge, mode, schedule, reserve or limits, warnings and connectivity.
- Energy-flow evidence: visible solar generation, household load and grid import/export at the time.
- Changes: any recent firmware, app, router, tariff, metering or installation change you already know about.
- Supporting material: screenshots, photos or video that show the issue without opening electrical equipment.
- Purchase information: proof of purchase where the case may involve warranty, return or retailer support.
If the investigation later becomes a warranty question, see our separate guide to home battery lifespan and warranty.
Who should investigate next?
The right owner depends on what the evidence points to. Product behaviour, electrical installation and purchase matters are different responsibilities.
If the question concerns how the battery was connected or commissioned, our home battery installation and commissioning guide explains that responsibility separately.
What if the problem only happens during a power cut?
A battery's behaviour during a grid outage depends on its backup architecture, the circuits connected to backup supply, available power and energy, and how changeover is implemented. That is a different troubleshooting task from normal grid-connected charging or discharging.
If the problem occurs only when the grid fails, use our separate guide to home battery behaviour during a power cut.
For Sunpura owners
For an S2400 or S2400 AC system, start by recording what our app shows, including the battery state, operating mode, schedule and any warning message. Use the mode name exactly as it appears in your current interface and record the app and firmware version so our support team can interpret it in the correct product context.
Our current S2400/S2400 AC manual documents scheduled charging and discharging within Customized mode. That makes the active mode and schedule useful evidence when behaviour does not match your expectation, but it does not make a missed schedule proof of a hardware fault.
If an S2400/S2400 AC shows a red fault indication, our current manual identifies red as a fault state and says the equipment should not be operated during a fault. Record the available fault information and contact our support team rather than applying a generic restart sequence.
For a technical enquiry, we may ask you to provide your S2400 configuration, serial number and proof of purchase; what happened and when; any messages, screenshots, photos or videos; your app and firmware version; connection type; and your meter or accessory configuration. Questions about the electrical installation should be handled by the installer or another competent electrical professional.
Use our Download Centre for the current Sunpura manuals and product documents. The S2400 support and documentation section also provides the current technical-support route.
Check the current instructions for your exact system
Product-specific procedures belong with the current manual. Check the documentation for your exact Sunpura model before carrying out any action that goes beyond normal user-visible observation.
Open the Download Centre